CP2HX Series

CP2HX Series is a more robust version of the CP-1Hx Series such as this new sensor shall almost be at the same size as the CP-1Hx series but adopt the thicker lead wires and higher waterproof level.

Since the input shaft is separated from sensor housing, it is suitable for the application that needs low torque and also easy to mount because you do not need to make the input shaft hole on the sensor mounting plate.

Dimensions (mm)

Touchless Type Hall-IC Rotary Angle Sensor Effective Electrical Travel: ±180° Absolute Linearity: ±2%FS Output Signal: Voltage Ratio/ PWM Dual Output (6-wires) IP67   More detail about CP2HX Series Go to CP2HX Main Page   Application Examples Boat and Yacht: Engine speed control lever AVG: Wheel angle sensing Rehabilitation Equipment: Joint angle