HP-18 Series
←BACK
Wire-Wound Multi-turn Potentiometer
| Our HP-18 Series is designed to be …
Key Features: Have an evaluation sample request for this product |
 |
PRODUCT SPECIFICATIONS
Electrical Specifications
| Effective Electrical Travel | 3600° |
| Total Resistance | 1K, 2K, 10K, 20KΩ |
| Independent Linearity | ±0.25%FS |
| Rated Dissipation | 2W |
| Analog Output Resolution | 0.019%~0.029% |
Mechanical Specifications
| Total Mechanical Travel | 3600° |
| Running Torque | 8.5mN・mMAX. |
| Weight | Approx.19g |
Environmental Specifications
| Category Temp. Range | -40 ~ +125℃ |
| Vibration | 150m/S2 |
| Shock | 500m/S2 |
DIMENSIONS (mm)
 |
DATA SHEET (PDF)/ CAD DATA (DXF)/ SHOP
| Product Number | Angle | Ind.Lin. | Total Resistance (Ω) |
Shaft Size | Rated Dissipation | Feature | Data/ Shop |
| HP-18 | 3600° | ±0.25% | 1K,2K,10K,20K | Φ6mm | 2W | 10-turn (10:1) Helical Pot |
PDF DXF SHOP |
RELEVANT INFORMATION
・Article
Technical Information “Precision Potentiometer – Positioning ” Post Date 12/19/2018
HANDLING INSTRUCTION
-
-
- Winding resistance may oxidize and causes sliding noise even this sensor is unused for a long time.
- Miswiring may cause burnout of the resistive element.
- To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
- Slight continuous vibration such as dither might cause the short lifetime of the sensor.
- To avoid damage of stopper, do not rotate the shaft at the end with excessive force.
-
APPLICATION EXAMPLES
 |
Control Panel: Dial |
 |
Lab Equipment |
Application Example by Use > Click Here
|
Looking to shop online or looking for product customization? |
Explore Other Product Categories
|
Got A Challenge For Us? We understand that each project has a unique requirement. |