LP-10F Series
←BACK
Conductive Plastic Linear Potentiometer
Our LP-10F Series is designed to be …
Key Features:
Any questions about this product? Contact us. |
|
---|
PRODUCT SPECIFICATIONS
Electrical Specifications
Modle Number | LP-10F | LP-10FB |
---|---|---|
Effective Electrical Travel | 10mm | |
Total Resistance | 1KΩ | |
Independent Linearity | ±1%FS | |
Rated Dissipation | 0.3W/50℃ |
Mechanical Specifications
Total Mechanical Travel | 12mm | |
---|---|---|
Friction | 0.3N MAX. | 3N MAX. |
Weight | Approx. 60g |
Environmental Specifications
Category Temp. Range | -40 ~ +100℃ |
---|---|
Vibration | 100m/S2 500Hz 3axis 2hours each |
Shock | 500m/S2 11ms 3axis 6directions 3times each |
DIMENSIONS (mm)
![]() |
DATA SHEET (PDF)/ CAD DATA (DXF)/ SHOP
Product Number | Stroke | Ind.Lin. *Abso.Lin. |
Total Resistance (Ω) |
Shaft Size(mm) |
Rated Dissipation * Input Voltage |
Feature | Data Shop |
---|---|---|---|---|---|---|---|
LP-10F
|
10mm |
±1%FS | 1K | M3 | 0.3W | Size Φ24mm |
PDF DXF SHOP |
LP-10FB
|
10mm |
±1%FS | 1K | Φ3 | 0.3W | Size Φ24mm w/ return spring |
PDF DXF SHOP |
RELEVANT INFORMATION
・VIDEO
Technical Data”How to Measure the Total Resistance Value of A Potentiometer” Post Date 11/02/2018
HANDLING INSTRUCTION
-
-
- Miswiring may cause burnout of resistive element.
- To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
- Do not apply high temperature solder on the terminals
- Slight continuous vibration such as dither might cause short lifetime of the sensor.
-
APPLICATION EXAMPLES
![]() |
![]() |
![]() |
Looking to shop online or looking for product customization? |
EXPLORE SIMILAR PRODUCTS
![]() |
![]() |
![]() |
Explore Other Product Categories
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Got A Challenge For Us? We understand that each project has a unique requirement. |